Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser guards your pride and joy from relay theft and key-longs. With a unique PIN sequence, unless you know the code, your car won't be able to start!
Transport Mode allows you to temporarily disable the device, which is perfect for vehicle transport and servicing. The device is then activated by entering a different PIN code.
No Key Fobs or Led Indicators
The Ghost 2 immobiliser offers a effective defense against modern theft techniques. Its undetectable installation and engine start blocking will reduce the risk of your vehicle being stolen, which can give you peace of mind, and may even save you money on insurance premiums.
It isn't detectable by scanners, and it cannot be hacked using standard methods like key cloning and signal jamming. The device makes use of buttons on your vehicle, like those on the steering wheel or door panels, to create a unique PIN code which can be changed. This sequence could be as long as 20 presses. Only the vehicle owner is able to start the engine when the right sequence or a beacon or mobile application is used. This adds an additional layer of security against thieves.
You can also activate an easy service mode in cases such as valet parking or servicing, which requires you to temporarily disable your system. This can be accomplished quickly and easily through a mobile app, meaning your car remains secure whilst being repaired. After the task is completed, it is easy to switch back to secure mode. This ensures that your vehicle is protected throughout the day.
The Ghost 2 is far more convenient to use than other systems that require a fob. The app can also function as a spare key in emergency situations, allowing you to drive your vehicle with the security off without entering your PIN code.
No Radio Frequency Signals
The Ghost 2 immobiliser is not like other security systems which require an additional remote control. ghost immobilise can be operated with the existing buttons on the console or steering wheel. It is indetectable by thieves who use the RF scanning technology or code grabbing, which means your car won't even start for them in the event that they get your key.
The device makes use of an unique password sequence of buttons to lock the engine. This PIN code is entered either on the app, or by using the buttons on the steering column or the center console. This allows you to secure the gearbox as well which means that your car can't be taken away unless you have a key or are capable of entering your pin code. The device can be set to Transport mode to allow you to drive the vehicle without entering your PIN code. This can provide additional protection for your vehicle when it is parked in a valet or service.
The Ghost 2 immobiliser is designed to act as a deterrent to theft that is as discrete as it can be, making it an appealing alternative for those who have spent an enormous amount of money making their vehicles more unique or have very expensive or rare cars. Many have reported that this is an excellent way to protect their cars from theft and even share stories of attempted thefts that have been stopped by the device. The Ghost 2 is also very versatile. Customers have reported that it can be used with their regular keys as well as with the emergency button on their vehicle, providing them with peace of mind when they're away from their car.
No Radio Frequency Scanners
Ghost immobilisers guard your vehicle against key copying and theft. The system uses the buttons in your vehicle, for example the ones on your steering wheel and dashboard, to create a unique, programmable sequence of buttons that only you know. Your car won't start without this sequence. The combination of a unique disarming sequence and the lack of radio frequency signals makes the device extremely difficult to penetrate or override.
In contrast to Thatcham approved devices which rely on radio frequency scanning, the Ghost CAN Immobiliser operates completely silently and does not require any external signals to do its magic. It is a safer alternative and is insured if installed by an approved installer of TASSA (we are one of them!) ).
Because of of how the Ghost immobiliser is integrated into your vehicle, it is strongly recommended that an expert installer complete its installation. This will ensure that it is seamlessly integrated with your vehicle's system, leading to optimal performance and lower risk of malfunction.
Furthermore, professional installation typically comes with warranties and service that further increase the value of your investment. This is a significant protection against thieves who are less likely to make any attempts at bypassing the device because of the security features and professional installation.
The Ghost isn't just a great deterrent to thieves, but it's designed to be easy to use. It is able to automatically re-arm itself after a specific amount of time, so you don't have to recollect your PIN every time you park your vehicle. It has a Service/Valet option for those who want to take your car for valet parking or to service. This can be enabled and deactivated by an easy indicator sequence.
No Wire Cutting
The Ghost 2 is non-invasive and does not require wire cutting during installation. It connects to your vehicle's CAN data network and is programmable with an unique PIN code. This blocks anyone else from starting the engine if they don't have a unique sequence of PINs or an app authorization.
It's also silent because it doesn't emit radio signals like some other immobilisers. It is weatherproof, sealed and small enough to be concealed in the vehicle.
The Ghost II also has the capability to be placed into a 'transport mode, which enables it to be used for short periods of time without the requirement of a personal PIN. This is ideal in situations such as giving the car to a family member or in an emergency situation. You can start your vehicle quickly and safely.
When installing the Ghost II, it's important to work in a well-lit space and wear protective gear when working with tools and electrical components. A basic set of hand tools will allow you to make precise connections and a multimeter can be used to verify electrical values and ensure your wiring is safe. Cable tie and insulation tape can be used to shield any wires that have been cut or exposed or to join them during installation.
It is essential to disconnect the battery in your vehicle before beginning any wiring work. This will stop any airbag deployments by accident or electrical shocks from occurring if the battery is disconnected when the Ghost II is still connected to the system of your vehicle.
Easy to Install
The Ghost immobiliser is an exclusive next-generation device that works by connecting directly to your vehicle's CAN Data Network and using a unique PIN Code to prevent your vehicle from getting started. This makes it more difficult to break than traditional alarm systems or after market key fobs and offers superior protection against key cloning hacking and relay attacks.
The device can be hidden in your vehicle and uses the buttons that are already present on your dashboard and steering wheel to create a sequence that only you are aware of. This stops thieves from using a fake car key to open it and also wards off the use of a diagnostic tool which thrives on hacking OBD.
Installation is easy and requires no cutting of wires. The unit is connected to the vehicle's CAN bus system using a continuous 12V supply as well as the ground connection. Hand tools are all you need to install the unit, and a multimeter will assist in locating the right wires. Insulation tape or heat shrink tubing is suggested to safeguard the connections and cable ties are a good option to keep the wiring tidy and organised.
After installation, the unit goes into a learning mode and records your unique sequences and buttons to create your unique pin code. This information is stored in the CAN network, making it nearly impossible for anyone to duplicate your sequence and then start your vehicle.
Transport Mode is a feature that can be utilized in the event of an emergency when you forget your PIN code, decide to sell your vehicle, or a button becomes inoperative. This will shut down the Ghost system completely but will automatically activate when you reach 31mph for over 15 minutes or when you enter your PIN Code. This is great for those who rent out their vehicles on services like Turo or ZipCar.